Why Choose This Product?

An undersized or unreliable sauna heater can result in uneven heating and a shorter lifespan. This heater is designed for standard-sized home saunas and features stainless steel construction both internally and as an external heat shield, ensuring stable performance even with frequent use. Complete your setup with the right sauna accessories for a full sauna experience from day one.

Benefits

• 6 kW output, suitable for saunas measuring 5–9 m³
• Stainless steel interior and external heat shield
• Built-in control panel with controls for heat and timer
• Thermostat that automatically maintains a consistent temperature
• Holds up to 25 kg of sauna stones
• Reaches the preset temperature in 30–60 minutes

Best Suited For

• Home saunas measuring 5–9 m³
• Anyone building or renovating a sauna
• Users who want to monitor the sauna climate with a thermometer and hygrometer
• Sauna owners who have already chosen stainless steel accessories

Frequently Asked Questions

How many sauna stones can the heater hold?

The heater can hold up to 25 kg of sauna stones.

How long does it take to heat the sauna?

Depending on the size of the sauna, the heater reaches the preset temperature in approximately 30–60 minutes.

Does the heater need to be installed by an electrician?

Yes. The electrical connection must be carried out by a qualified electrician in accordance with local electrical safety regulations.

Can the heater be connected to a standard 220V power supply?

Yes. The heater is prepared for 220V single-phase power, but the cable size and fuse rating must always be determined by the qualified electrician performing the installation.

Does the wall behind the heater need protection?

The wall must be able to withstand the heat and comply with the specified minimum clearances. It must never be clad with asbestos or fibre cement (asbestos-containing) boards. Only use materials approved for sauna wall construction.

• Model: SCA60N
• Power Output: 6.0 kW
• Material: Stainless Steel
• Suitable Sauna Size: 5–9 m³
• Stone Capacity: 25 kg
• Minimum Ceiling Height: 190 cm
• Minimum Distance to Side/Rear Wall: 10 cm
• Minimum Distance from Floor: 18 cm
• Minimum Distance to Ceiling: 110 cm
• Electrical Connection: 380V 3-phase, 415V 3-phase, 220V single-phase, or 240V single-phase
• Controls: Built-in control panel, thermostat, and timer

How to Use the Product

1. Have the heater connected by a qualified electrician in accordance with local electrical safety regulations.
2. Mount the heater on the wall according to the supplied clearance chart.
3. Rinse the sauna stones before placing them in the heater, and place the largest stones at the bottom.
4. Fill with a maximum of 25 kg of sauna stones without packing them too tightly.
5. Start the heater using the control panel and set the desired temperature and operating time.
6. Turn off the main power switch when leaving the sauna.